Figure 8-11. Time Setup Screen - Eaton POWERWARE 9315 Installation And Operation Manual

USING THE CONTROL PANEL
8-12
EATON Powerware
8.5.8 Time Setup Screen
Select Time from the Setup menu to display the Time Setup screen. The Time Setup
screen allows you to set the internal time stamp of the UPS. The time stamp is used
for logging events in the Event History Log. Figure 8-11 shows the Time Setup
screen.
UPS System Normal
ALARM: NONE
NOTICES: NONE
Battery
Minutes
48.5
Setup
Port 1
Port 2
Time
Language
Meters Events Statistics Graphics
A small return arrow (
the Time Setup screen. This arrow is a reminder that you can press the
pushbutton on the control panel to toggle the scroll bar between the menu box and
the information area. When the scroll bar is in the information area, the return arrow is
in the menu box. When the scroll bar is in the menu box, the return arrow is in the
information area.
When the scroll bar appears in the information area, you can use the pushbuttons to
change the time stamp settings. To change a setting, press the
to highlight the setting you want to change. To increase the setting (make it a higher
value), press the
the pushbutton. To save the settings upon exit from this screen, be sure the Save
field is set to YES.
®
9315 UPS (500–750 kVA) Installation and Operation Manual
Uninterruptible Power System
Set Time & Date
DAY DT MON
MON 07 APR
Setup

Figure 8-11. Time Setup Screen

) appears in the upper right corner of the information area of
pushbutton. To decrease the setting (make it a lower value), press
S
164201691 Rev 1 www.powerware.com
4 MAY 1999
YR HR:MN SAVE
99 15:06 YES
and pushbuttons
09:25:42