Figure 5-9. Time Setup Screen - Eaton Powerware 9315 Operation Manual

Select Time from the Setup menu to display the Time Setup screen. The Time Setup screen
allows you to set the internal timestamp of the UPS. The timestamp is used for logging
events in the Event History Log. Figure 5-9 shows the Time Setup screen.
UPS System Normal
Alarm:
Notice: None
Meters
The small return arrow (
This arrow is a reminder that you can press the
the buttons between the menu box and the information area. When the scroll bar is in the
information area, the return arrow is in the menu box. When the scroll bar is in the menu
box, the return arrow is in the information area.
When the scroll bar appears in the information area, you can use the buttons to change
the timestamp settings. To change a setting in the timestamp, press the
to highlight the setting you want to change. To increase the setting (make it a higher
value), press the
button. If you want to save the settings upon exit from this screen, be sure the SAVE field
is set to YES.
EATON Powerware 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev F powerware.com
®
Uninterruptible Power System
None
Battery
Percent
100%
Setup
Port 1
Port 2
Time
Events Statistics Graphics

Figure 5-9. Time Setup Screen

button. To decrease the setting (make it a lower value), press the
Set Time & Date
DAY DT MON YR HR:MN
MON 07 APR 97 15:06
Setup
) appears in the upper right corner of the Time Setup screen.
Using the Monitor Panel
04 NOV 1997 14:23:45
SAVE
YES
button on the Monitor Panel to toggle
and buttons
5-11