3 ] Uploading - Denso BHT-7500S User Manual

[ 3 ] Uploading

UPLOAD
1:ONE FILE
2:ALL FILES
3:HT<-->HT COPY
UPLOAD FILE
SAMPLE01.PD3
SAMPLE02.PD3
SAMPLE03.PD3
SAMPLE04.PD3
SAMPLE05.PD3
SAMPLE06.PD3
SAMPLE07.PD3
SAMPLE08.PD3
SAMPLE09.PD3
SAMPLE10.PD3
SAMPLE11.PD3
SAMPLE12.PD3
SAMPLE13.PD3
SAMPLE14.PD3
SAMPLE15.PD3
SAMPLE16.PD3
Chapter 2. Getting Started the BHT and System Mode
Selecting "3: UPLOAD" on the SYSTEM MENU calls
up the screen shown at left.
1 ONE FILE : Uploads a user program file
2 ALL FILES : Uploads all user program
3 HT<-->HT COPY : Uploads all of the files, sys-
Select a desired item by using the numerical keys
or keys, and the selected item becomes
and
highlighted. Then press the ENT key.
To return to the SYSTEM MENU, press the C key.
If you select "1:ONE FILE" on the UPLOAD menu,
the file selection screen as shown at left will ap-
pear, listing all of the program files and data files
stored in the memory. Select a file(s) you want to
upload and press the ENT key.
If you select "2:ALL FILES" or "3:HT<-->HT COPY"
on the UPLOAD menu, the "ALL" or "HT<-->HT" will
appear in the center of the 2nd line, respectively.
51
or data file stored in the
memory.
files (object programs) and
all data files stored in the
memory.
tem parameters, and calen-
dar clock data stored in the
BHT, to another BHT.
This function enables copy-
ing between the BHTs. At
the receiving BHT, select "2:
DOWNLOAD" and "2: HT<--
>HT COPY" in System Mode.
For the preparation to be
made preceding the start of
this function, refer to NOTE
given on page 46.