Denso BHT-7500S User Manual page 104

[5.7] Key entry & beeper test
TEST KEY & BEEPER
& VIBRATION
The table below shows the relationship between the keys, the identifier letters to be
displayed on the LCD, and the frequencies (Hz) of the beeper.
Key Letter Beeper (Hz)
C I 174
ALP J 195
SF K 220
L 246
M 261
N 293
O 329
M1 P 349
F9 Q 391
F10 R 440
M2 S 493
(Note) Only when the M3 (left-hand trigger switch) or M4 key (right-hand trigger
switch) is pressed, the vibrator works.
TEST KEY & BEEPER
& VIBRATION
IJKLMNO
PQRSTU
7894561230.=
ABCDEFGH
Selecting "7:KEY & VIBRATION" on the TEST menu
calls up the screen shown at left and makes the
BHT ready for entry from the keypad.
Pressing individual keys displays the identifier let-
ters in the positions pre-assigned to those keys on
the LCD as well as sounding the beeper or running
the vibrator. (As long as the individual key is held
down, the BHT continues beeping or vibrating.)
Pressing the same key again erases the displayed
letter.
Key Letter Beeper (Hz)
M3 T (Note)
M4 U (Note)
7 7 659
8 8 698
9 9 783
4 4 880
5 5 987
6 6 1046
1 1 1174
2 2 1318
3 3 1396
After all keys are pressed and displayed on the
LCD, this test automatically ends and the screen
returns to the TEST menu.
To stop this test, turn the power off.
84
Key Letter Beeper (Hz)
0 0 1567
. . 1760
ENT = 1975
F1 A 2093
F2 B 2349
F3 C 2637
F4 D 2793
F5 E 3135
F6 F 3520
F7 G 3951
F8 H 4186