Denso BHT-7500S User Manual page 92

[4.8-2] Setting the FTP
SET FTP
1:SERVER
2:OPTION
(1) FTP server connection environments screen
SET SERVER
1:SERVER IP
[XXX.XXX.XXX.XXX ]
2:USER ID
[12345ABCDEabcde ]
3:PASSWORD
[*************** ]
4:DEFAULT DIR
Selecting "2:SET FTP" on the SET TCP/IP menu
calls up the screen shown at left.
1 SERVER : Switches to the FTP server con-
nection environments screen.
2 OPTION : Switches to the data transfer pa-
rameters screen.
Select a desired item by using the numerical keys
or and keys, and then press the ENT key.
To return to the SET TCP/IP menu, press the C
key.
Selecting "1:SERVER" on the SET FTP menu calls
up the screen shown at left where the current
settings are displayed.
1 SERVER IP : Sets the IP address of an FTP
2 USER ID : Sets a user name.
3 PASSWORD : Sets a password.
4 DEFAULT DIR : Specifies an initial directory
Select a desired item by using the numerical keys
or and keys, and then press the ENT key.
The entry box of the selected item becomes ready
to accept entry and shows a cursor.
Enter the desired value by using the numerical
keys and period (.) key and then press the ENT
key.
Pressing the SF key switches the entry mode
between the numeric mode (without a guidance)
and alphabet mode.
In the entry mode, to delete a single character,
press the BS key ( SF + C keys). To delete the
whole entry you made, press the C key.
To return to the SET FTP menu, press the C key
when any item is highlighted.
72
server.
through which the FTP server
will search for files for trans-
fer first when the FTP client
gets connected to the server.