Denso BHT-7500S User Manual page 81

SET COMMUNICATION
1:OPTICAL
2:CONNECTOR
3:COM PORT
4:PROTOCOL TYPE
[4.5-1] Setting the communications parameters for the optical interface
SET OPTICAL
1:PARAMETER
2:PROTOCOL
Chapter 2. Getting Started the BHT and System Mode
Selecting the "5: COMMUNICATION" on the SET
SYSTEM menu calls up the screen shown at left.
1 OPTICAL:
2 CONNECTOR:
3 COM PORT:
4 PROTOCOL TYPE:
Select a desired screen by using the numerical
keys or keys, and then press the ENT
and
key.
To return to the SET SYSTEM menu, press the C
key.
Selecting "1:OPTICAL" on the SET COMMUNICA-
TION menu calls up the screen shown at left.
1 PARAMETER:
2 PROTOCOL:
Select a desired screen by using the numerical
keys or and keys, and then press the ENT
key.
To return to the SET COMMUNICATION menu,
press the C key.
61
Switches to the communi-
cations parameters setting
screen for the optical inter-
face .
Switches to the communi-
cations parameters setting
screen for the direct-con-
nect interface.
Switches to the interface
port setting screen.
Switches to the communi-
cations protocol type set-
ting screen.
Switches to the commu-
nications parameters set-
ting screen.
Switches to the commu-
nications protocol option
screen.