Denso BHT-7500S User Manual page 51

If Scandisk finds an invalid file(s), the following screen will appear. As long as an
invalid file exits, that screen displays every time the BHT System is started up.
(3) Press the ENT key to start up the BHT System.
Scandisk when the resume function is enabled
If Scandisk runs when the resume function is enabled, the screen given below may
appear. The screen may also appear when the calendar clock built in the BHT stops,
even without running Scandisk.
The BHT displays the screen for three seconds and then automatically runs the execu-
tion program from the beginning.
Chapter 2. Getting Started the BHT and System Mode
Scandisk found
invalid files.
Refer to the file
"$$BRKLST.SYS" for
more information.
No resume info.
has been retained.
Program restarts
automatically.
31