Denso BHT-7500S User Manual page 127

[8.2] SITE SURVEY menu
SITE SURVEY
1:LINK STATUS
[8.2.1] Link status screen
LINK STATUS
ASSOCIATED ACCESS POINT
XXXXXXXXXXXX
SIGNAL STRENGTH
BEACONS RECEIVED
LINK QUALITY
XXXXXXXXXXXXXX
LINK SPEED XXX MBPS
CHANNEL XX
Chapter 2. Getting Started the BHT and System Mode
Selecting the "2:SITE SURVEY" on the RF MENU
calls up the screen shown at left.
1 LINK STATUS Switches to the link status
Press the ENT key.
To return to the RF MENU, press the C key.
Selecting the "1:LINK STATUS" on the SITE
SURVEY menu calls up the screen as shown at
left. The current communications link status
appears in real-time.
XXX
ASSOCIATED ACCESS POINT
Displays the MAC address assigned to the
XXX
wireless interface of the associated access
point.
SIGNAL STRENGTH
CH
Displays the signal intensity of receive pack-
ets.
BEACONS RECEIVED
Displays the progress bar that shows the per-
centage of received beacon packets relative
to those to be received.
Beacon: Synchronous signals transmitted
periodically from the access point
107
BHT-7500W
screen.