8 ] Rf Menu Bht-7500S - Denso BHT-7500S User Manual

[ 8 ] RF Menu
RF MENU
1:SET ID
2:VERSION
[8.1] ID entry screen
SET ID
1:DOMAIN 0
2:SECURITY ID
[ ******************** ]
BHT-7500S
Selecting "8:RF" on the SYSTEM MENU calls up
the screen shown at left.
1 SET ID
2 VERSION
Select a desired item by using the numerical keys
or and
To return to the SYSTEM MENU, press the C key.
Selecting "1:SET ID" on the RF MENU calls up the
screen shown at left.
The "1:DOMAIN" shows the current setting. The
"2:SECURITY ID" shows 20 asterisks (*) to observe
secrecy.
1 DOMAIN
2 SECURITY ID: Specifies a security ID (max. 20
Select a desired item by using the numerical keys
or and
For a network domain name, use the
keys to select the desired value.
To enter a new security ID code, first press the
ENT
mode. A cursor will appear at the tail of the 20
asterisks. Then press the C key to clear all 20
asterisks and enter the desired code.
For details about the domains and security IDs,
refer to Subsection 3.1.2.
96
: Switches to the ID entry screen.
: Switches to the RF version
screen.
keys, and then press the ENT key.
: Sets a network domain name
(any of 0 to 15).
characters).
keys, and then press the ENT key.
key to switch to the alphanumeric entry
and