Operating In System Mode; 1 ] Calling Up The Desired Set Screen - Denso BHT-7500S User Manual

2.5.2 Operating in System Mode

Some functions in System Mode require several screens to be shifted, as shown in the
example below.

[ 1 ] Calling up the desired set screen

First, select a desired item on the current screen by using the numerical key or the
cursor keys ( and
Press the ENT key to establish the selected item and proceed to the subsequent
screen.
To return to the preceding screen, press the C key.
Press 4 or use
and
"SET SYSTEM."
Press 5 or use
and
"COMMUNICATION."
Press 3 or use
and
select "COM PORT."
) so as to highlight the desired item.
to select
to select
to
("7:FTP" and "8:RF" supported
by the BHT-7500S/7500W only)
ENT
C
("8:TCP/IP" supported by the
BHT-7500S/7500W only)
ENT
C
ENT
C
42