Denso BHT-7500S User Manual page 85

[4.5-3] Setting the interface port
SET COM DEFAULT PORT
1:BASIC
Optical Connector
2:SYSTEM MODE
Optical Connector
Chapter 2. Getting Started the BHT and System Mode
Selecting the "3:COM PORT" on the SET COMMU-
NICATION menu calls up the screen shown at left.
Highlighted is the current setting.
1 BASIC:
2 SYSTEM MODE:
Select a desired item by using the numerical keys
or and keys, and then select a desired
setting by using the
To return to the SET COMMUNICATION menu,
press the C key.
65
Selects the optical or direct-
connect interface port to be
used for user programs
written in BHT-BASIC
(OPEN "COM:").
Selects the optical or direct-
connect interface port to be
used for downloading or
uploading files in System
Mode.
and keys.