Denso BHT-7500S User Manual page 118

[8.2] RF version screen
SUB SYSTEM VERSION
Vx.x
MACID [001122334455]
If an error occurs for wireless-module parameters or information:
If some error occurs when the system is saving wireless-module parameters or getting
wireless-module information, one of the following screens will appear.
XXXXXXXXXXXX
Parameter save error!!
XXXXXXXXXXXX
Parameter load error!!
Selecting "2:VERSION" on the RF MENU displays
the "** Loading **" while the system is getting
information about the wireless module. After that,
the screen shown at left will appear.
Vx.x Firmware version of the wireless module
MACID MACID of the wireless module
To return to the RF MENU, press the C key.
Problem
The system has failed to save parameters into the
wireless module.
XXXXXXXXXXXX:
Problem
The system has failed to read setting from the
wireless module.
XXXXXXXXXXXX:
98
BHT-7500S
Title of a menu where the
error occurs.
Title of a menu where the
error occurs.