3 ] Uploading - Denso BTH-300BW User Manual

[ 3 ] Uploading

On the SYSTEM MENU, selecting "3: UPLOAD" calls up the screen
shown at left.
[1] ONE FILE:
[2] ALL FILES:
[3] HT<-->HT COPY:
Select a desired item by using the numerical keys or F5 and F6 keys,
and the selected item becomes highlighted. Then press the ENT key.
To return to the SYSTEM MENU, press the C key.
Selecting the BHT-protocol or BHT-Ir protocol does not display
or upload files created with BHT-BASIC 4.0*.
(*Applications with extension .PD4, extension libraries with
extension .FN4, and data files that have any of the following
structures: the number of fields is 17 or more, the total of the
number of fields and each field length is 255 or more, and the
number of records is 32768 or more)
If you select "1: ONE FILE" on the UPLOAD menu, the file selection
screen as shown at left appears, listing all of the program files and
data files stored in the memory. Select a file(s) you want to upload
and press the ENT key.
If you select "2: ALL FILES" or "3: HT<-->HT COPY" on the UPLOAD
menu, the "ALL" or "HT<-->HT" appears in the center of the 2nd line,
respectively.
If you select "1: ONE FILE" or "2: ALL FILES" on the UPLOAD menu
when no files are stored in the memory, the message shown at left
appears.
Pressing the C key returns to the UPLOAD menu.
53
Chapter 2 Getting Started the BHT and System Mode
Uploads a user program file or data file stored
in the memory.
Uploads all files in the memory except font
files.
Uploads all files in the memory except font
files to another BHT, together with system
parameters and calendar clock data.
This function enables copying between the
BHTs. At the receiving BHT, select "2:
DOWNLOAD" and "2: HT<-->HT COPY" in
System Mode.
For the preparation to be made preceding the
start of this function, refer to
page 47.
given on