ZyXEL Communications U-336R/RE User Manual page 84

Command
#C2
#C3
#C4
#C5
#C6
#C7
#P<string>
Status Report Result Codes
When your modem is in fax mode, each ATD or ATA command
will try to establish a fax connection. Your modem will send a
status report result code back to the DTE (computer).
NO DIAL
TONE
NO CARRIER
BUSY
NO ANSWER
72 Fax Operation
Function
Set minimum scan line time capability of the
receiver: 10 ms at 3.85 line/mm, T(7.7)=T(3.85).
Set minimum scan line time capability of the
receiver: 20 ms at 3.85 line/mm, T(7.7)=1/2
T(3.85).
Set minimum scan line time capability of the
receiver: 40 ms at 3.85 line/mm, T(7.7)=T(3.85).
Set minimum scan line time capability of the
receiver: 40 ms at 3.85 line/mm, T(7.7)=1/2
T(3.85).
Set minimum scan line time capability of the
receiver: 10 ms at 3.85 line/mm, T(7.7)=1/2
T(3.85).
Set minimum scan line time capability of the
receiver: 0 ms at 3.85 line/mm, T(7.7)=T(3.85).
Set local phone number to the phone number
following the character 'P' can store up to 25
characters. The modem will exchange this phone
number with the remote fax machine during initial
handshaking.
Tried to dial but no dial tone is detected.
Handshake fails or no carrier is detected or
time-out.
Other party's phone line is busy.
Quiet answer is not detected before time-out.