Required Steps For U-336R/Re Installation - ZyXEL Communications U-336R/RE User Manual

LED
SQ
The following LED is for the U-336R only:
LED
LL
There are two toggle switches on the U-336R/RE front
panel.VOICE/DATA Toggles the modem on-line (off-hook,
DATA) or off-line (on-hook, VOICE mode, the telephone set is
connected to the line). ANS/ORG switches the modem between
ANSWER and ORIGINATE modes when the modem goes off
hook.
O O N : T
OTE HE
MODEM IS SET TO OFF
MODEM OFF HOOK
FOR THE MODEM TOO

Required Steps for U-336R/RE Installation

Setting up the rack system consists of plugging in modem cards,
connecting phone lines, connecting to computers, and connecting
power. Refer to your rack system User's Guide for details on
setting up the rack.
Name
Signal Quality
Name
Leased Line
Mode Indicator
ANS/ORG
SWITCH ONLY DETERMINES MODEM ON
-
HOOK MANUALLY
,
THOSE COMMANDS WILL DETERMINE THE OPERATING MODE
.
ON
Modem senses a
good quality signal.
ON
Modem is in Leased
Line Mode.
. I ATD ATA
F OR
Blinking
Modem
senses
marginal
signal quality.
Blinking
-
LINE MODES WHEN THE
COMMANDS TAKE THE
Installation 9