Extended At* Command Set - ZyXEL Communications U-336R/RE User Manual

Command Options Function & Description
&Z?
&Zn=s

Extended AT* Command Set

Command Options Function & Description
*Bn
*Cn
*Dn
*En
&Y2 Nondestructive, unexpedited.
Display all the phone numbers stored
in non-volatile RAM.
n=0-49 Write phone number/s to NVRAM at
location n (n=0-49) use AT*Dn or
ATS29=n to set the default dial
pointer.
Dial-backup selection.
*B0 * Disable dial-backup.
*Bn Enable dial-backup and set dial-
backup pointer at telephone
directory location (n-1). See also
S34, S44b2)
Character length, including start,
stop and parity bit.
*C0 * 10-bit character length.
*C1 11-bit character length.
*C2 9-bit character length.
*C3 8-bit character length.
n=0-49 Set default dial pointer at telephone
directory location n.
*D0 * (See also S35.4 and S38.0)
Modem error control negotiation.
*E0 * if error control negotiation fails,
keep the non-error control
connection.
*E1 If error control negotiation fails,
disconnect the call (hang-up).
AT Command Set Summaries 89
Ref.
Ref.
S30
S15.3-4
S29
S21.0