ZyXEL Communications U-336R/RE User Manual page 69

Command Syntax
+<command>=<value>
+<command>=?
+<command>?
Supported Commands (per TIA PN2388 8/20/90)
Command
+FAA=n
+FBADLIN=
<value>
+FBOR=n
+FBUF?
+FCIG="string"
+FCLASS=n
+FCON
+FCQ=n
Description
Execute a command or set a parameter.
Read permissible settings.
Read current setting.
Value Description
Auto-answer mode parameter:
n=0 Answer as set by +FCLASS.
n=1 DCE answers and auto-determines
type.
0-255 Bad line threshold (number of
consecutive bad lines for a bad page
parameter):
Determine if Copy Quality OK on the
T.30 flow chart . <value>=0 to 255; a
value of 0 implies that error checking
is disabled.
Phase C data bit order:
n=0 Select direct bit order.
n=1 Select reversed bit order in receiving
mode for phase C data.
Buffer size; read only parameter:
Allow DTE to determine the
characteristics of the DCE's buffer
size.
Local fax station ID string, for polling
Rx.
Service class selection: Refer to
+FCLASS Class 1 command in
previous section.
DCE responds fax connection .
Copy quality check capability
Fax Operation 57