ZyXEL Communications U-336R/RE User Manual page 73

Command
+FREL=n
+FREV?
+FSPL=n
All other +F commands are not supported, but the modem will
respond OK. In many cases this means "don't care." See PN 2388
for command details.
Class 2 Command Responses
Response Value Function and Description
+FCFR
+FCIG:"string
"
+FCON
+FCSI:"string"
+FDCS:vr,br,
wd,ln,df,ec,bf,s
t
+FDIS:vr,br,w
d,ln,df,ec,bf,st
+FDTC:vr,br,
wd,ln,df,ec,bf,s
Value Description
n=5 Page good; procedure interrupt
requested.
Phase C received EOL alignment:
n=0 The EOL patterns are bit aligned as
received.
n=1 The last received bits of EOL patterns
are byte aligned by the DCE, with
necessary zero fill bits inserted. Refer
to TIA PN-2388 for details.
Request the DCE revision
identification.
"Enable polling" command:
n=0 Disable polling.
n=1 Enable polling.
Confirmation.
Report remote ID response CIG.
Facsimile connection response.
Report remote ID response CSI.
Report session parameters response;
refer to +FDCC=.... command.
Report session negotiation parameters
response; refer to +FDCC=.... command.
Report remote capabilities response;
refer to +FDCC=.... command.
Fax Operation 61