ZyXEL Communications U-336R/RE User Manual page 103

Command Options Function & Description
*M1
*Pn n=0-15
*P11 *
*Qn
*Q0
*Q1
*Q2 * Adaptive rate, automatic fall-back or
*Q3
*Rab
a=0-3
b=0-3
b=4
b=5
*T
*V
*Wab
a=0-3
a=4
a=5
b=0-3
The AT+F commands are located in the chapter 7.
Set to Answer mode.
Set leased line transmission power
level; ranges from 0 dBm to -15
dBm (default: -11 dBm) (see also
S35.3).
Action taken when line quality
changes.
No action to poor signal quality.
Retrain action taken if signal quality
is poor. (See also S41.2)
forward.
Disconnect if signal quality is poor.
Read remote profile "b" to local user S36.1
Local user profile number "a".
Remote user profile number "b".
Remote active configuration.
Remote factory default
configuration.
Recall the last CND (Caller ID)
information..
View the Password table.
Write local configuration profile "a"
to remote user profile "b" and reset
remote modem from profile "b".
Local user profile number "a".
Local active configuration.
Local factory default configuration.
Remote user profile number "b".
AT Command Set Summaries 91
Ref.
S17.1-4
S27.6-7
S37.4-7
S37.0-3
S40.2
S36.1
S37.4-7
S37.0-3