ZyXEL Communications U-336R/RE User Manual page 79

Command Value Description
0-64
(HEX
value)
cbl=
0-FF
(HEX
value)
+FSP=n
n=0
n=1
Class 2.0 Command Responses
Response Value
+FCI:"CSI ID
string"
+FCO
+FCS:vr,br,w
d,
ln,df,ec,bf,st
+FET:<ppm>
ppm=0 Another page next, same document.
ppm=1 Another document next.
ppm=2 No more pages of documents.
ppm=3 Another page next, same document,
with negotiated number of pixels)
required for a page considered
acceptable. The percentage of good lines
would be computed by the equation:
100 x (<lc> - <bl>) / <lc>
lc: total line count as reported in the
+FPS: response.
bl: bad line count as reported in the
+FPS: response.
If the resulting value is less than the value
in <pgl>, the page is unacceptable.
Specify the maximum tolerable number of
consecutive bad lines. If this value is
exceeded for a given page, the DCE shall
consider the page unacceptable.
Enable polling command:
Disable polling.
Enable polling.
Function and Description
Report remote ID response, Called Station
ID.
Fax connection established response.
negotiated session parameters (DCS
frame information) response. Refer to
+FIS= comnd.
Post page message response:
Fax Operation 67