ZyXEL Communications U-336R/RE User Manual page 90

Command Options Function & Description
DL
DSn
En
Hn
In
78 AT Command Set Summaries
, Pause for a time specified in S8.
Remaining digits will be dialed as in-
band DTMF.
; Return to command state after
dialing.
! Hook flash.
@ Wait for a 5 second silence before
proceeding.
R Reverse handshake (go on-line in
Answer mode).
W Wait for second dial tone.
Remaining digits will be dialed as in-
band DTMF.
Repeat last ATD command.
n=0-49 Dial number stored in non-volatile
RAM at location 'n'; use "+" to dial
two consecutive numbers for
bundling or MPPP calls.
Command mode local echo of
keyboard commands.
E0 Echo off.
E1 * Echo on.
On/off hook control
H0 * Hang up (on-hook) the modem or
ISDN, same as 'ATH'.
H1 Off hook the modem.
Display inquired information.
I0 Display numerical product code,
same as 'ATI'.
I1 Display product information and
ROM checksum.
I2 Display modem link status report.
Ref.
S17.5
S44.3
S23.0