Replacing The Projector Lamp; Removing And Replacing The Projector Lamp Module - Smart Technologies SMART Board 800i5-SMP Configuration And User's Manual

C H A P T E R 5
Maintaining your interactive whiteboard system

Replacing the projector lamp

This section provides detailed instructions for replacing the projector lamp module.

Removing and replacing the projector lamp module

Eventually the lamp will dim and a message will appear reminding you to replace it. Make sure you
have a replacement lamp module before proceeding with the following instructions.
W
W A R N I N G
See smarttech.com/compliance
l
Replace the lamp module when the projector displays its lamp life warning message. If you
l
continue to use the projector after this message appears, the lamp can shatter or burst,
scattering glass throughout the projector.
If the lamp shatters or bursts, leave and then ventilate the area.
l
Next do the following:
Avoid touching the glass fragments because they can cause injury.
o
Wash your hands thoroughly if you have come into contact with lamp debris.
o
Thoroughly clean the area around the projector, and discard any edible items placed in
o
that area because they could be contaminated.
Call your authorized SMART reseller for instructions. Do not attempt to replace the
o
lamp.
Replacing the lamp module in a wall-mounted projector can result in a fall or injury. Use
l
caution when climbing a ladder, and consider removing the projector from the wall-mounting
bracket to replace the lamp module.
Uncovering the lamp while the projector is mounted on the wall-mounting bracket can lead to
l
product damage or personal injury from falling pieces of glass if the lamp is broken.
39
for the projector's MSDS documents.