Replacing Existing Controller; Figure 5-8 Remove Controller From Top Slot - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual

5-8 RAID Array 3000 Pedestal Storage Subsystem Hardware User's Guide

Replacing Existing Controller

1. Replace the existing controller with the new controller
(Figure 5-8 to remove).

Figure 5-8 Remove controller from top slot

NOTE: Ensure that you install the new controller in the same slot as the existing controller
removed in step 1. Do not leave the existing controller in the pedestal while performing
the following step.
2. Power up the system and then restore the configuration on the new
controller as explained in the following section.