Figure 3-9. Location Of Scsi Bus Configuration Switch; Figure 3-10. Configuration Switch - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual

NOTE: To decrease the configuration number, Press the upper switch to step the
address down one address at a time (decrement) until the desired configuration number is
displayed.
To increase the configuration number, press the lower switch to step the address up one
address at a time (increment) until the desired configuration number is displayed.
10. Close the side panels and replace the cover screw.

Figure 3-9. Location of SCSI bus configuration switch

6

Figure 3-10. Configuration switch

NOTE: Reconfiguring the bus also involves cable and bus terminator changes. Chapter 4
"Expansion Pedestal Option" describes, in detail, how to reconfigure the bus.
6
3000-38
Maintenance 3-17