Updating Firmware On Second Controller; Figure 5-10. Restored Configuration Example - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual
Pedestal storage system hardware
Hide thumbs
Also See for StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem:
- Hardware user's manual (103 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
5-10 RAID Array 3000 Pedestal Storage Subsystem Hardware User's Guide
Updating Firmware on Second Controller
The saved configuration screen with a Restore from File field appears as
shown in the example of Figure 5-10.
Figure 5-10. Restored configuration example
NOTE: Restoring the configuration in the following step may take up to 5 minutes.
4. Enter the file name that you saved in "Saving Existing Configuration"
and click Restore.
1. After configuration has been restored, update firmware on the second
controller. Repeat the procedure in Section "Update Firmware Using
SWCC" or "Update Firmware Using Serial Interface".
2. After the configuration has been restored and firmware has been
updated, power down the system.
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem and is the answer not in the manual?
Questions and answers