Sbb Status Leds - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual

Maintenance 3-3
Figure 3-1 shows the Pedestal status LEDs.
Figure 3-1. Pedestal status LEDs

SBB Status LEDs

Each disk drive SBB in the pedestal has two status LEDs— a green activity
LED and an amber fault LED as shown in Figure 3–2. When the pedestal is
operating properly, the activity LED is flashing indicating normal disk activity
on the SCSI bus, and the fault LED is off. Table 3–1 lists the states of the SBB
LEDs and recommends corrective actions when an LED indicates a fault
condition.