Connecting To Your Dual Controller Storage System - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual
Pedestal storage system hardware
Hide thumbs
Also See for StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem:
- Hardware user's manual (103 pages) ,
- User manual (112 pages)
Table of Contents
Advertisement
5-14 RAID Array 3000 Pedestal Storage Subsystem Hardware User's Guide
Connecting to Your Dual Controller Storage System
NOTE: If the storage window connection is lost when the cable is moved, reopen the
HSZ22 StorageWindow).
16. Once the second Virtual Disk has been created, close the StorageWorks
window.
17. To complete dual-controller configuration, perform the following:
Ensure all cables and connections to your server are in place
Leave the RA3000 Rack Mount Storage System powered on
Reboot the server
Refer to the Getting Started RAID Array 3000 Installation Guide for your host
system to configure the virtual disks as communications LUNs.
1. Open the StorageWorks management utility.
2. Refer to the Getting Started RAID Array 3000 Installation Guide for
your host system for instructions describing how to connect the RA3000
to your host system.
Advertisement
Table of Contents
Need help?
Do you have a question about the StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem and is the answer not in the manual?
Questions and answers