Restoring The Configuration; Figure 5-9. Restoring Configuration To New Controller - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual

Restoring the Configuration

To restore your configuration to the new controller:
1. Restart SWCC in the Serial Mode (refer to the Getting Started RAID
Array 3000 Installation Guide for your host system guide for
instructions).
2. Select the Storage pull-down menu from the Toolbar, then choose
Controller.
3. From the Controller pull-down menu, select Configuration, and then
Restore (Figure 5-9).

Figure 5-9. Restoring configuration to new controller

Second Controller Option 5-9