Figure 4-14. Connect Scsi Cable Between Pedestals - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual

4-14 RAID Array 3000 Pedestal Storage Subsystem Hardware User's Guide
13. Reinstall the side panel on the base pedestal.
14. Connect the HD68-to-HD68 SCSI cable from the D1 OUT connector on
the base pedestal to the D1 IN connector on the rear of the expansion
pedestal as shown in Figure 4–14.
Base
Pedestal

Figure 4-14. Connect SCSI cable between pedestals

Expansion
Pedestal
3000-47