Figure 4-16. Transfer Drives From Base To Expansion Pedestal - Compaq StorageWorks TM RAID Array 3000 Pedestal Storage Subsystem Hardware User's Manual

4-16 RAID Array 3000 Pedestal Storage Subsystem Hardware User's Guide
16. Transfer the bottom three disk drives (slots 4, 5, and 6) from the base
pedestal to the top three slot locations (slots 0, 1, and 2) in the expansion
pedestal as shown in Figure 4–16.
ID = 8
ID = 9
ID = 10
ID = 11
ID = 8
ID = 9
ID = 10
Base Pedestal

Figure 4-16. Transfer drives from base to expansion pedestal

17. Install the new drives in the remaining slots of each pedestal to complete
the installation.
18. Power up the UPS and the two pedestals and then proceed to the
Compaq StorageWorks RAID 3000 Configuration and Maintenance
Guide to configure the expanded subsystem.
ID = 8
ID = 9
ID = 10
ID = 11
ID = 12
ID = 13
ID = 14
Expansion Pedestal
3000-46