Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications page 93

Page Code: Page Descriptor Name
1: Read/Write Error Recovery Parameter
2: Disconnect/Reconnect Parameter
3: Format Parameter
4: Drive Parameter
7: Verify Error Recovery Parameter
8: Read Caching Parameter
A: Control Mode Parameter
C: Notch Parameter
19: Port Control Parameter
1C: Information Exception Control Parameter
21: Additional Error Recovery Parameter
3F: All Page Descriptors Supported by the IDD
When the value specified in the "Page code" field is other than X '3F', the specified "Page descriptor"
only is transferred to the INIT, and when X '3F' is specified, all the "Page descriptors" supported by the
IDD are transferred to the INIT in the ascending order of the page code, but if SCSI-1/CCS is specified
by the CHANGE DEFINITION command (SCSI level), Page code 7, Page code 8, Page code A, Page
code C and Page code 1C are not transferred. Also, when X '00' is specified in the "Page code field," the
"Page descriptor" is not transferred.
descriptors" which are not supported by the IDD) are specified, the command is terminated with a
CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in CDB [=24-00]).
C141-C010
(Sub Page 00)
(Sub Page 01)
(Sub Page 02)
(Sub Page 03)
(Sub Page 04)
(Sub Page 00)
(Sub Page FF)
If page codes other than the abovementioned ones ("Page
3.1 Control/Sense Commands
Page Byte Length
CCS SCSI-2
8 bytes 12 bytes
12 bytes 16 bytes
24 bytes 24 bytes
20 bytes 24 bytes
12 bytes 12 bytes
20 bytes 20 bytes
12 bytes 12 bytes
24 bytes 24 bytes
8 bytes 8 bytes
22 bytes 22 bytes
234 bytes 234 bytes
14 bytes 14 bytes
14 bytes 14 bytes
12 bytes 12 bytes
4 bytes 4 bytes
68 bytes 168 bytes
68 bytes 452 bytes
SCSI-3
12 bytes
16 bytes
24 bytes
24 bytes
12 bytes
20 bytes
12 bytes
24 bytes
8 bytes
22 bytes
234 bytes
14 bytes
14 bytes
12 bytes
4 bytes
168 bytes
452 bytes
3-31