Application Client Page (X'0F'); General Usage Application Client Parameter Data (Page 0F, Code 0000-003F) - Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications

Parameter Data Formats
The Accumulated start-stop cycles is a parameter provided by the device sever. The accumulated start-
stop cycles parameter shall not be savable by the application client using the LOG SELECT command.
The parameter value is a 4-byte binary number. The value indicates how many start-stop cycles the
device has detected since its date of manufacture. For rotating magnetic storage device, a single start-
stop cycle is defined as an operational cycle that begins with the disk spindle at rest, continues while the
disk accelerates to its normal operational rotational rate, continues during the entire period the disk is
rotating, continues as the disk decelerates toward a resting state, and ends when the disk is no longer
rotating. The count is incremented by one for each complete start-stop cycle. No comparison with the
value of parameter 0003h shall be performed by the device server.
4.2.9

Application client page (X'0F')

Bit
Byte
0
1
2
3
All of the following parameters have this header.
Page Length will be defined based on the value of Parameter Pointer. (CDB 5-6)

4.2.9.1 General usage application client parameter data (Page 0F, Code 0000-003F)

Bit
Byte
4
5
6
7
8
9
~
~
258
259
4-66
7 6 5
0 0 0
7 6 5
(MSB)
X'0000'-X'003F' (Parameter code)
(Application Client Parameter)
DU DS TSD
1 0 0
X'FC' (Parameter Length)
(MSB)
~
~
General Usage Paramter Bytes
4 3 2
0 1 1
X'00' (Reserved)
Page Length (MSB)
Page Length (LSB)
4 3 2
ETC TMC
0 0 0
1 0
1 1
1 0
(LSB)
LBIN LP
1 1
~
~
(LSB)
C141-C010