Figure 3.32 Receive Diagnostic Results Command: Response Data Configuration - Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications

Figure 3.32 shows the format of response data transferred to the INIT from the IDD by this command. The
response data are configured from a 4-byte "Page header" and the "Page parameters" which follow it.
Byte
Header
Page
Parameters
~
~

Figure 3.32 RECEIVE DIAGNOSTIC RESULTS command: Response data configuration

•
Page code
This field is the same value as the page code specified in the parameter list transferred form the INIT
by the SEND DIAGNOSTIC command executed last, and shows a code which identifies the type of
response data reported in this command.
•
Page parameter length
This field shows the byte length of the page parameter after byte 4.
•
Page parameter
Data which show the execution results of the operation specified by the SEND DIAGNOSTIC
command are reported in this field.
C141-C010
Bit
7 6
0
1 0 0
2
3
4
5
~
~
Parameter
n
3.4 Maintenance, Diagnostic Commands
5 4 3
Page Code
0 0 0
Page Parameter Length (MSB)
Page Parameter Length (LSB)
2 1 0
0 0 0
~
~
3-107