Persistent Reserve In (5E) - Fujitsu MAX3073NC - SCSI,80, Dell DC961,Hard Drive Scsi Logical Interface Specifications

Page Code
00 Supported Log Pages
01 Buffer Overrun / Underrun Page
02 Write Error Counter Page
03 Read Error Counter Page
05 Verify Error Counter Page
06 Non-medium Error Page
0D Temperature Page
0E Start-stop Cycle Counter Page
0F Application Client Log Page
10 Self-Test Result Log Page
2F SMART Status Page
38 SMART Data Page
The "Parameter Pointer" field allows the application client to request parameter data beginning from s
specific parameter code to the maximum allocation length or the maximum parameter code supported by
the target, whichever is less. If the value of the "Parameter Pointer" field is larger than the largest
available parameter code known to the device server for the specified page, the device server terminates
the command with CHECK CONDITION status (ILLEGAL REQUEST [=5] / Invalid field in CDB
[=24-00]).
The "Parameter List Length" field in the CDB specifies the total number of bytes of log parameter which
can be transferred to the INIT by this command. The IDD transfers the number of bytes of all log
parameters specified in the "Page Code" field or the portion of log parameters with the length specified
in the "Parameter List Length" field, whichever is smaller. When zero is specified in the "Parameter List
Length" field, this command is terminated without anything being transferred.
3.1.18

PERSISTENT RESERVE IN (5E)

Bit 7
Byte
0
1 0
2 0
3 0
4 0
5 0
6 0
7
8
9 0
C141-C010
Description
6 5 4
0 0
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
Allocation Length (MSB)
Allocation Length (LSB)
0 0 0
3.1 Control/Sense Commands
Parameter Pointer
Ignored
Supported
Supported
Supported
Supported
Should be zero
Supported
Supported
Supported
Supported
Ignored
Ignored
3 2
X'5E'
Service Action
0 0
0 0
0 0
0 0
0 0
0 0
1 0
0 0
0 0
0 0
0 0
0 0
0 Link
3-55