2-3-7.Adjustment Function - Epson PowerLite 5350 Installation Manual

2-3-7.Adjustment Function

Warning
• Support from the bottom while adjusting. After adjustment, completely retighten all of the screws.
• Provide sufficient support when removing the pipe through bolt. Can result in dropping.
(1)Horizontal angle adjustment
If the image is shifted to the left or
right in relation to the screen,
loosen the pipe screw and adjust
by rotating to the left or right.
(2)Height adjustment
When making large changes in the
vertical position of the image on the
screen, remove the pipe through
bolt and pipe lock nut, and adjust
by sliding the pipe. Adjust using the
table and
right.Use the mounting bracket to
fine tune the vertical adjustment
and tilt.
drawing shown
Pipe lock screw
at
Pipe lock nut
42
Pipe through bolt