Solutions When Image Is Incorrect Using The Usb Display Function - Epson EB-770F User Manual

• If you cannot project a screen mirroring image, make sure the Capture setting is disabled.
• If the other solutions do not solve the problem, reset all of the projector settings using the options on
the Initial/All Settings menu.
Parent topic:
Related references
Display Settings - Display Menu
Setup Settings - ECO Menu
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Related tasks
Selecting an Image Source
Unlocking the Projector's Buttons
Shutting Off the Picture and Sound Temporarily

Solutions When Image is Incorrect Using the USB Display Function

If no image appears or if the image appears incorrectly using the USB Display function, try the following
solutions:
• Press the USB button on the remote control.
• Disconnect and reconnect the USB cable.
• Press the Source Search button on the remote control or control panel, and select USB Display.
• Make sure the USB Display software has installed correctly. Install it manually if necessary.
• Make sure your computer is connected to the USB-B port on the projector.
• Make sure the USB Display setting is set to On in the projector's Signal I/O menu.
• On a Mac, select the USB Display icon in the Dock or from the Applications folder. If you select Exit
from the USB Display icon menu in the Dock, USB Display does not start automatically when you
connect the USB cable.
• If the mouse cursor flickers, select Make the movement of the mouse pointer smooth in the Epson
USB Display Settings program on your Windows computer.
• Turn off the Transfer layered window setting in the Epson USB Display Settings program on your
computer.
• If you change the computer resolution during projection, the video quality and performance may
decline.
Solving Image or Sound Problems
261