(3)Remove the operating panel lead circuit board and front case.
Raise the front case gently to a position where the lead circuit board's
•
connections can be checked.
Release the connector lock and remove the lead circuit board.
•
Remove the front case.
•
Memo
Be sure to remove the front case only after releasing the lead circuit board lock. Otherwise, you
may damage the load cicuit board and connector.
(4)Remove the speaker unit at the left (facing to the lens).
Remove a screw of the fixing plate for attaching the speaker unit.
•
Gently lift up the speaker unit until the four screws fixing the lens can be seen.
•
Memo
When moving the speaker unit, be sure to not break the wire.
Speaker unit
Fixing plate
Release lock
Connector
12
lead circuit board