6-5.I/O terminals
6-5-1.Model EMP-7350/EMP-7250/EMP-5350
[1]
[2]
[3]
[4]
[1]Audio Out
It is used to output the audio signal from the projector.
[2]Remote
It is used to connect the optional remote control receiver.
[3]Computer Out
It is used to output the signal from the computer.
[4]BNC
•R/R-Y
•G/Y
•G Sync
•B/B-Y
•HD/Sync
•VD
It is used to input the BNC video signal from the workstation, or the component video signal
(color-difference signal) from the video.
To use the image from this terminal, place the BNC switch of the I/O terminal at the back of the
projector to the "BNC" side.
[5]S-Video
It is used to input the S-Video signal from the A/V equipment.
[6]Video
It is used to input the video signal from the A/V equipment.
[8]
[10]
[9]
[5]
[7]
[6]
78
[9]
[10]
[8]
BNC Switch