Epson PowerLite 5350 Installation Manual page 81

• HD/Sync
• VD
It is used to input the BNC video signal from the workstation, or the component video signal
(color-difference signal) from the video.
To use the image from this terminal, place the BNC switch of the I/O terminal at the back of the
projector to the "BNC" side.
[9]Computer1
It is used to input the video signal from the computer.
[10]L-Audio2-R
It is used to input the audio signal from the A/V equipment through a RCA pin jack.
[11]Audio1
It is used to input the audio signal from the A/V equipment through a stereo mini jack.
[12]Mouse/Com1/2
It is used to connect to the computer when using the remote control as a wireless mouse, or the
Projector Software supplied with the projector.
81