2-3-8.Checking That The Projector Is Operational - Epson PowerLite 5350 Installation Manual

2-3-8.Checking that the projector is operational

(1) Make the necessary connection to the power supply, computer, and video source.
(2) Remove the projector lens cap.
Caution:
If the projector is used with the lens cap installed, it may be melted due to heat.
(3) Place the RC ON OFF switch on the remote control to "ON".
Note:
If the RC ON OFF switch on the remote control is not placed to "ON", you cannot operate the
projector with the remote control.
(4) Press the Power button on the remote control to turn on the projector.
ELP-7350/7250/5350
(5) Input the computer or video signal to check that the image is projected properly.If
you cannot input the computer or video signal, press [Menu] button to check that
the menu displayed is projected properly.
Note:
If necessary, check the activation of the projector and functions such as Zoom in and Zoom out.
ELP-8000
45
Remote control