2-3-6.Using The Ceiling Mounting Bracket Fixture And Pipe; Installing The Flange - Epson PowerLite 5350 Installation Manual

2-3-6.Using the ceiling mounting bracket fixture and pipe

The projector can also be mounted using the optional ceiling plate and pipe as described
below.
•

Installing the Flange

• Assemble the flange and mounting bracket using the dimensions shown in the diagram below.
• Install so that the optical axis of the projector lens is perpendicular to the screen.
• Refer to page 13 and projector for information concerning the distance from the screen.
Pipe
Pipe370
Pipe570
Pipe770
Pipe is adjustable in increments of 50mm.
You can use one of the following 2 methods to set the pipe in the mounting bracket fixture:
1. Set the ceiling mounting bracket onto the pipe after first finishing all assembly of the ceiling
mounting bracket and projector, etc.
2. Mount only the ceiling mounting bracket onto the pipe, then assemble all the other
components including the projector.
Assemble as follows using either of the above 2 methods.
A dimension
ELPFP01
ELPFP02
ELPFP03 1000-1150
600-750
800-900
39