2-3-3.Adjustment Function - Epson PowerLite 5350 Installation Manual

2-3-3.Adjustment Function

Warning
• Support from the bottom while adjusting. After adjustment, completely retighten all of the screws.
Can result in dropping.
(1)Tilt adjustment (adjustable range:
approx. 5 degrees up/down)
If the projected image is at an angle
on the screen, loosen the tilt
adjustment screws then adjust the
projector by moving it vertically.
(2)Horizontal angle adjustment:
(adjustable range:
degrees right/left)
If the image is shifted to the left or
right in relation to the screen,
loosen the mounting
fixture screws
rotating the projector to the left or
right.
(3)Vertical angle adjustment:
(adjustable range: approx. 5
degrees up / 10 degrees down)
To move the projected image on
the screen vertically, loosen the
vertical angle adjustment screws
then adjust by turning the unit.
approx. 5
bracket
and adjust by
Screen
Tilt adjustment lock screw
34
ate
Vertical angle
adjusiment screw
Rotate