Adjusting The Projected Screen; Displaying The Test Pattern; Adjusting The Projector's Tilt; Lens Adjustment Function (Focus, Zoom, Lens Shift) - Epson EH-LS10000 User Manual

Basic Operations

Adjusting the Projected Screen

Displaying the Test Pattern

Immediately after installation, a test pattern is used to adjust the zoom, focus, and the projection position.
Press the button on the remote control to display the test pattern.
EH-LS10000
You can also select patterns that display R (red), G (green), and B (blue) individually, as well as the pattern for
adjusting the display position. You can use it as a pattern to perform color adjustment when an image signal
is being input.
Press the button or select Exit to end the test pattern display.

Adjusting the Projector's Tilt

If the projected image is tilted (the left and right sides of the projector are at different heights) when the
projector is setup on a shelf, adjust the front foot so that both sides are level with each other.

Lens Adjustment Function (Focus, Zoom, Lens Shift)

To adjust the focus, zoom, or lens shift, press the
and then select the item you want to adjust.
EH-LS9600W
button on the remote control or the control panel,
31