Epson PowerLite 5350 Installation Manual page 53

(3) Turn on the computer connected to the master projector, and start "ELP-Link IV".
(4) When "ELP-Link IV" is started, the following window is displayed. Always select
"No" on the window.
(5) Select the menu item as follows.
For Windows users:
clicking Help.
by
For Macintosh users:
by clicking the apple mark "?".
The version information window appears.
(6) Assign a password as follows.
For Windows users: Press [Ctrl] + [I] key.
For Macintosh users: Press [Command] + [I] key.
The version information window disappears, and the window to enter a password
appears.
(7) To assign a password, type the password, and click OK button.
(A password must be up to 16 alphanumeric characters.)
If you do not want to assign a password, just click OK button without any entry.
*No password is entered at installation.
(8)The Installer specific setting window appears.
Select "About ELP-Link IV" on the pull-down menu appeared
Select "About ELP-Link IV" on the pull-down menu appeared
53