•
Attaching the LONG THROW ZOOM LENS
Warning
• The lens is sold under the condition that it is attached by a dealer with sufficient skill and
technical ability.
• Tighten the screws securely.
• Incorrect attachment of the lens may result in it falling and causing accidents if the projector is
suspended.
Memo
• Always attach or remove the lenses in a clean dust-free room. Dust inside the projector can
cause malfunctions.
<Model EMP-7350/EMP-7250/EMP-5350>
(1)Remove the rear interface panel.
Remove the four screws and detach the interface panel.
•
(2)Remove the front case screws.
Remove five screws: two each side and one at the rear.
•
Remove two screws: one at the handle and one at the bottom.
•
Interface pane
Front case
11
Handle