2-2-2.Connecting to a video source
<Model EMP-7350/EMP-7250/EMP-5350>
Note:
• If the projector is located at a distance from a video source, a universal extension cable can be
used to connect to a workstation. Avoid an unnecessarily long cabling. The unnecessarily long
cabling may cause image noise.
• Never tie the A/V cable and power cable together. It may cause image noise.
• Inputting the composite video signal
•
Inputting the composite video signal
The A/V cable supplied with this projector can be used to connect to a video source.
Video terminal(yellow)
Audio terminal L (white)
Audio terminal R (red)
•
Inputting the S-Video signal
A commercially available S-Video cable can be used to connect to a video source as it is not
supplied with the projector.
Audio terminal
L (white)
Audio terminal
R (red)
A/V cable (supplied with this projector)
S-Video terminal
Commercially available S-Video cable
A/V cable (supplied with this projector)
27
Video terminal
(yellow)
S-Video terminal
Audio terminal L
(white)
Audio terminal R
(red)
Audio terminal L
(white)
Audio terminal R
(red)