Epson PowerLite 5350 Installation Manual page 18

<Model EMP-7350/7250, PowerLite 7350/7250>
Warning
• Be sure to screw the wide conversion lens and adapter ring down completely. Unless they are
securely screwed on, they could fall off and cause damage or injury (especially when the
projector is ceiling-mounted).
(1)Remove the rear lens cap.
(2)Screw the wide conversion lens into the standard lens.
(3)Rotate it in the direction of the arrow below until it is secure.
Standard lens
Rear lens cap
18
Screw in tightly
Wide conversion lens