Epson PowerLite 5350 Installation Manual page 55

The following table shows the buttons/boxes on the Installer specific setting window and the
respective description/function.
Button/box
[1]Projector select button
[2]Function select
combobox (pop-up
menu)
[3]Setting item
combobox (pop-up
menu)
[4]Subsetting item
combobox (pop-up
menu)
[5]Setting entry area
[6]Send button
[7]Lock/unlock button
[8]Stack setup button
[9]Stack release button
[10]Password change
button
[11]Stop setting button
(9) Click Stack setup button.
When the stack-connection is established, the window indicating that the stack-
connection is made successfully appears.
(10) Click OK button.
Select a projector to be set. It works in the same manner as with the
projector control window. It disables all buttons on projector 1 to 4
on a standalone connection.
Selects a function. Generally, it adapts to the OSD on the projector.
The items displayed include Image (computer), Image (video),
Audio, Effects, Setting, User logo, and Advanced.
Changes the function of this control with this box. Generally, it
adapts to the OSD on the projector.
This box can be used if there is a menu entry below the setting item.
If not, disable this box. It prevents the effects function setting from
being changed (only lock/unlock can be possible).
Consists of the edit box and combobox (pop-up menu). For an
numerical setting item, the edit box is enabled. For a selection item,
the combobox (pop-up menu) is enabled.
Sends the setting displayed to the projector after this button is
pressed if any value is entered (or selected) in the Setting entry
area. It is disabled if not.
Disables all setting items and controls in the group box if clicking the
Large key button. It enables them by clicking it again. This button
disables the Subsetting item combobox currently displayed (pop-up
menu), Setting entry area, and Send button if clicking the Small
key button. It enables them by clicking it again. It disables the
Initialize all tabs button on the projector control if all initialization is
locked. It enables or disables the projector control items of the ELP-
LINK IV itself according to the current status.
Establishes the stack-connection by clicking this button.
Releases the stack-connection by clicking this button.
Changes the password to move to the Installer specific setting
window. The password change window appears by
button .
Terminates the Installer specific settings. It returns to the normal
projector control window, and enables each item on the function
select combobox (pop-up menu) by clicking this button.
55
Description/function
clicking this