Epson PowerLite 5350 Installation Manual page 6

Hide thumbs Also See for PowerLite 5350:
Table of Contents

Advertisement

Failure to do so may result in injury due to falling or breakage.
• Do not place the projector on an unstable place such as a wobbly or inclined stand.
Failure to do so may result in injury due to dropping or breakage.
• Install or keep the projector out of the reach of children.
Failure to do so may result in injury due to dropping or breakage.
• Do not place the projector on a humid or dusty place, or near a place with greasy fumes/steam
given off such as a cookware or humidifier.
Failure to do so may result in fire or electric shock.
• Do not block the intake fan/exhaust fan on the projector. They provide ventilation and prevent
the projector from overheating which may lead to fire. Do not place the projector in a place as
follows:
• In an enclosed area such as a closet and bookcase.
• On a rug, bedding or blanket.
• Do not cover a cloth such as a blanket, curtain and tablecloth over the projector.
Keep the clearance of 20 cm or more between the wall and the projector if wall-mounted.
• Turn off the projector, unplug it from the wall outlet, and ensure that all cabling is disconnected
before moving the projector.
Failure to do so may result in fire or electric shock.
• Never remove the lamp immediately after turning off the projector.
• Failure to do so may result in burns or injury due to heat.
Let the projector cool for about 60 minutes after turning off it. Ensure that the projector is
sufficiently cooled down before replacing the lamp.
• Misuse of a battery can result in fire, injury, or corrosion on the projector due to explosion or
liquid leakage. Always take the following precautions when using a battery safely.
• Do not use batteries different in kind or old and new batteries together.
• Always use the type of battery indicated in the instruction manual.
• Wipe off liquid leaked from a battery with a cloth, and replace it with the new one.
• Replace a dead battery with the new one immediately.
• Remove batteries if you will not use the projector for an extended time.
• Do not heat s battery or dispose of it in fire or water.
• Check the polarity (+, -) before inserting a battery.
• Wash your hands immediately if leaked liquid has contacted to them.
Dispose of an old battery following the local regulations.
• Disconnect the power plug/power connector from the wall outlet before cleaning.
Failure to do so may result in electric shock.
6

Advertisement

Table of Contents
loading

Table of Contents