Paper Jam Sensor Removal - Epson DFX-8500 Service Manual

DFX-8500

3.2.6.11 Paper Jam Sensor Removal

1. Remove the left and right covers. (See Section 3.2.3.2.)
2. Remove the front panel. (See Section 3.2.3.3.)
3. Remove the upper case. (See Section 3.2.3.4.)
4. Remove the printer mechanism. (See Section 3.2.6.)
5. Remove the plunger and paper bail. (See Section 3.2.6.7.)
6. Remove the upper paper guide and top PE sensor. (See Section 3.2.6.8.)
7. Remove the platen. (See Section 3.2.6.10.)
8. Remove 1 screw (CPN (SP), M4×8) securing the left part of the lower paper guide to the platen. (See
Figure 3-64.)
9. Remove the left part of the lower paper guide from the platen. (See Figure 3-64.)
10. Unhook the paper jam sensor cover, then remove it. (See Figure 3-65.)
11. Remove the paper jam sensor. (See Figure 3-65.)
Make sure the paper jam sensor is oriented correctly when you reattach it.
3-44
Lower Paper Guide
Screw (CPN (SP), M4×8)
Figure 3-64. Lower Paper Guide Left Part Removal
Paper Jam Sensor
Cover
Figure 3-65. Paper Jam Sensor Removal
REMINDER
Platen
Right
Left
Paper Jam Sensor
Lower Paper Guide (Left)